发那科扩建 ROBOSHOT、ROBOCUT 工厂并新建加工工厂

Factory Expansion and New Factory Construction

AI 导读

发那科（FANUC）正在总部推进三座工厂的扩建与新建，以提升 ROBOT、ROBOSHOT 和 ROBOCUT 的产能。ROBOSHOT 工厂为扩建项目，投资额约 87 亿日元（不含生产设备），总建筑面积约 26,000m²，为两层建筑，现有厂房约 24,000m²，产能将达 600 台/月（含现有厂房的 400 台/月），计划 2018 年 9 月底完工。ROBOCUT 工厂同样为扩建，投资额约 18 亿日元（不含生产设备），总建筑面积约 6,000m²，为两层建筑，现有厂房约 7,000m²，产能将达 150 台/月（含现有厂房的 100 台/月），计划 2018 年 11 月底完工。新建的加工工厂投资额约 65 亿日元（不含生产设备），总建筑面积约 23,000m²，为单层建筑，产能为每月 1,000 台 ROBOT、200 台 ROBOSHOT 和 50 台 ROBOCUT 所需零部件，计划 2018 年 9 月底完工。

正文 · 原文

May 7, 2018
FANUC CORPORATION

To increase the production capacities of ROBOT, ROBOSHOT and ROBOCUT, the expansion and construction of three factories are being conducted in FANUC Headquarters:

ROBOSHOT Factory (expansion)
- Investment amount : Approximately 8.7 billion yen (not including production equipment)
- Total floor area : Approximately 26,000m²two-story building. (Existing building is approximately 24,000m²)
- Production capacity : 600 units/month (including 400 units/month of existing building)
- Completion : End of September, 2018
ROBOCUT Factory (expansion)
- Investment amount : Approximately 1.8 billion yen (not including production equipment)
- Total floor area : Approximately 6,000m²two-story building. (Existing building is approximately 7,000m²)
- Production capacity : 150 units/month (including 100 units/month of existing building)
- Completion : End of November, 2018
New Machining Factory (new construction)
- Investment amount : Approximately 6.5 billion yen (not including production equipment)
- Total floor area : Approximately 23,000m²one-story building.
- Production capacity :
  - Parts for 1,000 ROBOTs/month
  - Parts for 200 ROBOSHOTs/month
  - Parts for 50 ROBOCUTs/month
- Completion : End of September, 2018

New Machining Factory